Well the good news is that like NetBSD the kernel boots. Â The downside is that none of the network adapters I could think of work. Â They are either ignored, or crash out the kernel.
OpenBIOS for Sparc64
Configuration device id QEMU version 1 machine id 0
kernel cmdline
CPUs: 1 x SUNW,UltraSPARC-IIi
UUID: 00000000-0000-0000-0000-000000000000
Welcome to OpenBIOS v1.1 built on Nov 15 2014 12:59
Type ‘help’ for detailed information
Trying cdrom:f…
Not a bootable ELF image
Not a bootable a.out image
Loading FCode image…
Loaded 4829 bytes
entry point is 0x4000
OpenBSD IEEE 1275 Bootblock 1.3
..
Jumping to entry point 0000000000100000 for type 0000000000000001…
switching to new context: entry point 0x100000 stack 0x00000000ffe8aa09
>> OpenBSD BOOT 1.6
Trying bsd…
open /pci@1fe,0/pci-ata@5/ide1@2200/cdrom@0:f/etc/random.seed: No such file or d
irectory
Booting /pci@1fe,0/pci-ata@5/ide1@2200/cdrom@0:f/bsd
3864176@0x1000000+2448@0x13af670+3261928@0x1800000+932376@0x1b1c5e8
symbols @ 0xffc5a300 119 start=0x1000000
Unexpected client interface exception: -1
console is /pci@1fe,0/ebus@3/su
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.6 (RAMDISK) #178: Fri Aug 8 05:00:27 MDT 2014
[email protected]:/usr/src/sys/arch/sparc64/compile/RAMDISK
real mem = 2147483648 (2048MB)
avail mem = 2103877632 (2006MB)
mainbus0 at root: OpenBiosTeam,OpenBIOS
cpu0 at mainbus0: SUNW,UltraSPARC-IIi (rev 9.1) @ 100 MHz
cpu0: physical 256K instruction (64 b/l), 16K data (32 b/l), 256K external (64 b
/l)
psycho0 at mainbus0: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-2, PCI bus 0
psycho0: dvma map c0000000-dfffffff
pci0 at psycho0
ppb0 at pci0 dev 1 function 0 “Sun Simba” rev 0x11
pci1 at ppb0 bus 1
ppb1 at pci0 dev 1 function 1 “Sun Simba” rev 0x11
pci2 at ppb1 bus 2
unknown vendor 0x1234 product 0x1111 (class display subclass VGA, rev 0x02) at p
ci0 dev 2 function 0 not configured
ebus0 at pci0 dev 3 function 0 “Sun PCIO EBus2” rev 0x01
“fdthree” at ebus0 addr 0-ffffffff not configured
com0 at ebus0 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
com0: console
“kb_ps2” at ebus0 addr 60-67 not configured
“Realtek 8029” rev 0x00 at pci0 dev 4 function 0 not configured
pciide0 at pci0 dev 5 function 0 “CMD Technology PCI0646” rev 0x07: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7d4 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.2.> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
prtc0 at mainbus0
softraid0 at root
scsibus1 at softraid0: 256 targets
bootpath: /pci@1fe,0/pci-ata@5,0/ide1@2200,0/cdrom@0,0:f
root on rd0a swap on rd0b dump on rd0b
unix-gettod:interpret: exception -13 caught
interpret h# 01c099ec unix-gettod failed with error ffffffffffffffed
WARNING: bad date in battery clock — CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/sparc64 5.6 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? (I)nstall, (U)pgrade, (A)utoinst
all or (S)hell? s
#
But it’s great it’s this close!