I’ve slowly been trying to piece together my old Netware 4.1 stuff to try to run it on Virtual PC… the best I can find is that I’d need parts of Netware 6 to get the networking to run….
But then the other day, I had remembered that you could run Netware 4.1 under OS/2 (the 32bit ones)..
The only ‘snag’ is that I’d need a working CD-ROM driver… And IDE-CD’s didn’t become somewhat popular until the 3.0 WARP days.
Well I did manage to find this zip file,
CL_ATAPI.ZIP (Mirror CL_ATAPI.ZIP) that contains the IDE drivers!.. And as it mentions in the BBS description it’ll work on 2.0! Except that it gives NO hints on how to install it.
After a LOT of googling around, I was able to piece together a working solution. Adding this to the config sys by first commenting out the ibm1s506.add.. (Naturally unzip CL_ATAPI.zip into the os2 directory!
BASEDEV=IBM1s506.add /A:1 /U:0 /ATAPI