DooM 1.2j1.0 on NekoProject II

So the first thing you’ll need is Neko Project II.  It can be a little hard to track down downloads, but there is a whole slew of them here:

http://ux.getuploader.com/emu/index/1/date/desc the site has since moved to here:

http://nenecchi.html.xdomain.jp/

https://simk98.github.io/np21w/download.html (it moved again)

So for now this link, is the latest build, which was last updated on

Extract that, and rn np21nt.exe

You’ll want to configure the sound.

MIDI options

MIDI options

If you choose to use the MIDI you’ll have to map them to a MIDI-OUT port, and I used the default Microsoft GS Wavetable.  Of course you could use MUNT, or any other MIDI mapper or port.  Also you may want to setup the serial port MIDI as a backup plan.

Serial MIDI

Serial MIDI

The sound effect settings work best for the PC-9801-86 audio board.

xx

Select the correct board!

I’ll save installing MS-DOS, and installing DooM for another fun episode, but to configure DooM.

Run setup.exe to setup DooM!

Setup menu

Setup menu

The menu is simply:

  • 1 graphics
  • 2 Background Music
  • 3 sound effects
  • 4 not sure
  • 5 controller
Graphics

Graphics

The PC9821A driver works best from what I’ve done in my limited testing.  I guess if you had a different emulator, or a real PC-98 you’ll get more out of this.

Next is the BGM or music

BGM

BGM

You really have 2 options here, #3 for the PC9801 driver which uses the YM2608 chip.  Or the General MIDI either option 4 or 6. I didn’t notice any difference between the two of them, they both sound kinda slow, but workable.

Now for the audio board, select the PC-98

Doom sound drivers

Doom sound drivers

The PC-9801-86 is what you want here.  Now with either a 100% PC-9801-86 config, or a 50/50 of the MIDI/PC-9801-86 we are ready to run DooM!  Selection option 6 and away we go!

Save settings and run DooM

Save settings and run DooM

And all being well you’ll get the start of DooM!

DooM starting up

DooM starting up

Otherwise you’ll get this fun error:

DX386 error

DX386 error

In this case I had emm386.sys in my config.sys which conflicts with the dos extender DX386.

Personally I find it easier to boot off the #1 install diskette which will automatically start DooM!

If you are feeling brave, listen!

3 thoughts on “DooM 1.2j1.0 on NekoProject II

  1. Holy crap, you didnt joke about being brave.
    Btw since you started dabbling in jp, have you ever seen PC-UX, or PC-UX/V demonstrated in screenshot/video form anywhere on the interwebs?

Leave a Reply to rasz_pl Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.